Industrial Recycling Solutions Inc
EXTENDED LIFE 50/50 GLOBAL COOLANT MSDS
SECTION I
Chemical
Product and Company Identification
Product
Trade Name:
Product
Name: Ethylene Glycol Solution or
Compound, (ELCH/D)
General
identification or generic identification: Antifreeze or Coolant
MSDS
# 10002
Manufactured
and Distributed by: Phone:
623.979.1192 Fax:
623.979.9058
Industrial Recycling
Solutions
2610 West Holly Street #C Emergency phone: Chemtrec 800-424-9300
Phoenix, AZ
85009-2600
Mailing
Address: P O Box 878, Peoria,
AZ 85380-0878
SECTION II
Ingredient CAS # Composition % PEL/TLV
Ethylene
Glycol 107-21-1 40-95% 125 mg/m
Diethylene
Glycol 111-46-4 0-10% ND
Propylene
Glycol 57-55-6 0-10% ND
Additives/Sodium
Salts/Organic
acid Proprietary 3-10% ND
Water 7732-18-5 Balance None
Subject
to reporting requirements of SARA 313 and 40 CFR 372
Section III
Boiling
Point: 50% Between (BT) 212F and 230F; Concentrate: (BT) 310F and 350F
Specific
Gravity @ 60F: BT 1.110 and 1.145
Solubility
in water: Complete
pH: BT 7.0 and 11.0
Evaporation
rate: Not Determined (ND)
Physical
state: Liquid
Appearance:
blue/green; pink/red; orange/red
Vapor
density: ND
Vapor
pressure: ND
Page 2 IRSI Material Safety Data Sheet 10002
Section IV
Stability : Stable
Incompatible
with : Strong
oxidizers, strong acids, strong bases,
Avoid : Extreme
heat, open flame
Hazardous
decomposition : Carbon monoxide,
carbon dioxide, and oxides of nitrogen
Section V
General:
Harmful or fatal if swallowed. Breathing
concentrations of vapors have been reported to effect the nervous and blood
forming systems.
Ingestion:
Harmful or fatal if swallowed. May
cause abdominal irritation, nausea, vomiting and diarrhea..
May cause reproductive disorder. Target organs are
kidneys, liver and central nervous system.
Skin
contact: Irritant.
Eye
contact: Irritant
Inhalation:
High concentrations of warm to hot mist (as in leaning over open radiator with
hot antifreeze)
May
cause blood-forming disorders and effect the nervous
system.
May cause reproductive disorders.
Section VI
Occupational
Exposure Limits
Permissible
Exposure Limit (PEL): None established for mixture
Threshold Limit Value (TLV): None established for
mixture
Section VII
Eyes: Flush with water for 15 minutes, get medical
attention.
Skin: Flush with large amounts of water for 15 minutes
while removing contaminated shoes and clothing.
Vapors (breathing): Remove to fresh air. If experiencing
breathing difficulty, give oxygen. If breathing stops, give artificial
respiration. Get medical attention.
Pg.
3 IRSI Material Safety Data Sheet 10002
Swallowing: If conscious . give two glasses of water or
milk. CALL POISON CONTROL CENTER OR PHYSICIAN IMMEDIATELY. Do NOT induce vomiting without
consulting physician. Do NOT give fruit juice, vinegar or sodium bicarbonate.
If unconscious or having
convulsions SEEK MEDICAL HELP IMMEDIATELY.
Section VIII
Store
and handle in a well-ventilated area. Do not breathe concentrated mist. Wear
gloves and footwear impervious to solvents. Wear safety glasses. Clean water
should be available at the work area for flushing.
Store in a well-ventilated area, with all fittings
tight, away from heat.
Section IX
Flash
Point: greater than 230 F
Auto
ignition: ND (believed to be greater than 700F)
Extinguishing
media: Class B extinguisher, Co2, dry chemical powder or foam
Emits Toxic Fumes when on
fire. Wear self-contained
breathing apparatus.
Section X
Spill
or Leakage Measures
Ventilate
area; evacuate personnel use appropriate NIOSHA respirator. Block sewers; do
not let into surface water. Dike spill. Spill can be
absorbed with sand, clay, mop or other absorbents. Try to absorb with mop and
place in used antifreeze container.
Consult local authorities for proper disposal of
absorbents.
Section XI
Antifreeze
is a non-regulated product per DOT regulation.